In Episode 2 we have 4 Hacking puzzles, two of them tied to the narration and the other two are parts of your dispatch call. You can avoid one of them but if you want to get “Hacked by Robert” (H4ck3d by R0b3rt) achievement you have to go for the hacking. Here is a complete visual step-by-step guide for all four of the hacking puzzles in Dispatch Episode 2. If you are looking for a general guide covering all the techniques and information you need to solve puzzles, check out our Dispatch Hacking Guide.
In This Guide:
Cray Cray Bidet Hacking Sequence
A lady calls saying that her “bidet is spraying shit everywhere”. This is a very easy puzzle, probably even easier than the Episode 1 Hacking. So don’t worry.
Go down the pass until you reach the node with hammer icon. Activate it an enter the sequence.
Now go to the node with two hammers on it. Enter the sequence, follow the lower path to the bottom node with hammer and activate it.
Go back to the node with two hammers and reactivate it to complete the upper path. Now go to the upper node with hammer and activate it.
Now go back to the node with hammers (do NOT reactivate it) and follow the middle path to finish the hacking.
Museum Robbery Hacking Sequence
This time you have three options. Choosing “Hack into the system” lead to a hacking puzzle which is similar to the previous one in terms of difficulty.
Follow the path and when you reach the crossroad go right and activate the node.
Now go back and continue down the left path, activate the node with two hammers on it.
From there go left and activate the node.
Now go back to the node with two hammer and reactivate it. Then continue your path to the right until you reach the end.
Accessing CCTV Hub Hacking Sequence
In order to help Invisigal you need to switch camera to get a better look but there’s an extra layer of security and you have to solve yet another hacking puzzle.
Follow the path until you reach the node with two hammers on it. Activate it and go up.
You have to activate the icon with hammer, then go back and reactivate the node with two hammers for the second time.
Go to the bottom node with hammer and activate it. Then go back and reactivate the node with two hammers for the third and last time. Now go up and follow the path on the right,
You’ll see four nodes which might look complicated but don’t worry. It’s actually much easier than it looks. First go to the node with hammer icon and activate it.
Now go to the node with the key icon. After activating it an arrow sequence will be displayed which you have to memorize.
Now go to the node with the lock icon and enter that password.
Finally go up and finish the hacking sequence.
Activating Overhead Sprinklers Hacking Sequence
In this hacking sequence you have to use a new mechanism. The password you need is actually broken into two parts.
Follow the path and when you reached the crossroad, go downwards. When you get to the node with two hammers, activate it.
Now continue your path and go to the upper node with key icon. Activate it to find out the first part of the password. You’ll need this to open the lock.
Now go back to the node with two hammers and reactivate it. Then go to the lower key node to retrieve the second part of the password.
Go back to the two hammer node and reactivate it for the last time. Then go back to that first crossroad and activate the node with lock icon. First you have to enter the first part of the password then the second.
Finally you can finish the last hacking sequence in Dispatch Episode 2.
